1 |
FILLING WEIGHT |
500gms, 1Kg & 2.5Kg |
10 Kg |
2 |
POUCH TYPE |
C Pillow type pouches having centre seal and fin seal. |
C Pillow type pouches having centre seal and fin seal. |
3 |
MAX. POUCH SIZE |
350mm (W) x 500mm (Ht) |
400mm (W) x 660mm (Ht) |
4 |
PACKAGING |
Virgin Films like LDPE MATERIAL (Max. Roll Width : 720mm) |
Virgin Films like LDPE MATERIAL (Max. Roll Width : 830mm) |
5 |
OUTPUT |
For 500gms & 1Kg filling weight– Speed: 17 - 19 pouches/minute. For 2.5Kg filling weight Speed: 8 - 10 pouches/minute |
10kg filling weight -Speed: 3-4 pouches/minute. |
Note:(Speed depends on pouch size, Flow ability, Uniform product size, Moisture Content & Bulk Density of the product and type of the film) Subject to the following:-
- Uninterrupted product flow.
- Uniformity of film thickness +/-5%
- Connection of the machine to an effective air pressure system.
- Strict maintenance of the machine as per our Instruction Manuals.
|
6 |
WEIGHT ACCURACY |
For 500gms, +/- 75gms For 1Kg, +/- 150gms For 2.5Kg, +/- 175gms |
For 10kg +/-500gms |
- Feeding of the product at a constant rate so as to maintain the level inside the machine hopper. - Cleaning of the Volumetric Dosing Cups at regular time intervals.
- Constant Bulk Density.
|
8 |
MACHINE CONSTRUCTION |
Complete machine construction is of M.S All product contact parts are of S.S.316. |
Complete machine construction is of M.S All product contact parts are of S.S.316. |
9 |
SEALING METHOD |
Impulse Sealing/ Thermoweld Sealing–Virgin Films (Customer to decide the alternative) |
Impulse Sealing/ Thermoweld Sealing–Virgin Films (Customer to decide the alternative) |
10 |
CHANGE PARTS |
Change Parts needed for different grammages/sizes. |
Change Parts needed for different grammages/sizes. |
11 |
ELECTRICALS |
440/230V, 3 Phase, 50 Hz, AC. |
440/230V, 3 Phase, 50 Hz, AC. |
In case of abnormal fluctuations in voltage and/or frequency, we recommend that you install a voltage stabilizer to feed constant voltage to the machine. |
12 |
POWER REQUIRED |
3.0 KW |
5.7 KW |
13 |
COMPRESSED AIR REQUIREMENT |
Model no.: CPM7D/10-200 Type: Tank Mounted Screw Compressor Refrigerated Dryer: With Dryer Capacity (fad) [ cfm ]: 21.2 cfm Max working press [barg]: 10 Motor rating [ hp ]: 7.5 Air Receiver: 200 Ltrs
Accessories Set of Filters: 1 Micron & 0.01 ppm |
Model no.: CPM7D/10-200 Type: Tank Mounted Screw Compressor Refrigerated Dryer: With Dryer Capacity (fad) [ cfm ]: 21.2 cfm Max working press [barg]: 10 Motor rating [ hp ]: 7.5 Air Receiver: 200 Ltrs
Accessories Set of Filters: 1 Micron & 0.01 ppm |
14 |
CONTROLS |
Machine is controlled through PLC (Programmed Logic Controller) - Mitsubishi Make |
Machine is controlled through PLC (Programmed Logic Controller) - Mitsubishi Make |
15 |
TESTING MATERIAL |
In case of an order, we request you to send us 2 rolls of packaging material and 50 Kg Of the product for testing to our works, 4 weeks prior to the despatch date. |
In case of an order, we request you to send us 2 rolls of packaging material and 50 Kg Of the product for testing to our works, 4 weeks prior to the despatch date. |